CW-70

All around the world, temperature controlled concrete is used to build large sized sets and to fill in the large scaled bases of high buildings. The heat exchanged with water during the process, increases the temperature of the concrete to 25C, causing the volume to expand. However, after the operations, the temperature of the concrete falls and the volume shrinks. The above-mentioned process generally leads to cracks in the sets, so the initial filling temperature of the concrete should be low enough to ensure that the maximum temperature reached during the operations does not exceed the value set by the design units. Using + 1C / + 2C cold water together with the flake ice is the most effective precooling method. Every 10kg of flake ice reduces the temperature of concrete down to 12C to 14C.
NESIM fulfills the needs of some of the world’s largest ice facilities for concrete cooling projects.

TECHNICAL INFORMATION

Model Name: CW-70

Cold Water Capacity (1hr): 5000 lt

Cooling Capacity: 166000 watt

Evaporation Temperature: 0 ℃

Condensation Temperature: +45 ℃

Compressor Power: 70 HP

Compressor Displacement: 222 m3/h

Water Tank: 3000 Lt.

Chassis: 20ft HC Containerized

Dimensions (WxLxh): 2438x6058x2891 mm.

Weight: 4000 kg

Water Inlet Temperature: 28 ℃

Water Outlet Temperature: +1/+4 ℃

Outside Temperature: +35 ℃

Refrigerants: R404a

Evaporator Type: Baudelot Heat Exchanger

Energy: 380V/50Hz/3Ph

CW-80

All around the world, temperature controlled concrete is used to build large sized sets and to fill in the large scaled bases of high buildings. The heat exchanged with water during the process, increases the temperature of the concrete to 25C, causing the volume to expand. However, after the operations, the temperature of the concrete falls and the volume shrinks. The above-mentioned process generally leads to cracks in the sets, so the initial filling temperature of the concrete should be low enough to ensure that the maximum temperature reached during the operations does not exceed the value set by the design units. Using + 1C / + 2C cold water together with the flake ice is the most effective precooling method. Every 10kg of flake ice reduces the temperature of concrete down to 12C to 14C.
NESIM fulfills the needs of some of the world’s largest ice facilities for concrete cooling projects.

TECHNICAL INFORMATION

Model Name: CW-80

Cold Water Capacity (1hr): 6000 lt

Cooling Capacity: 200000 watt

Evaporation Temperature: 0 ℃

Condensation Temperature: +45 ℃

Compressor Power: 80 HP

Compressor Displacement: 258,2 m3/h

Water Tank: 3500 Lt.

Chassis: 20ft HC Containerized

Dimensions (WxLxh): 2438x6058x2891 mm.

Weight: – kg

Water Inlet Temperature: 28 ℃

Water Outlet Temperature: +1/+4 ℃

Outside Temperature: +35 ℃

Refrigerants: R404a

Evaporator Type: Baudelot Heat Exchanger

Energy: 380V/50Hz/3Ph

CWM-300

Nesim industrial bakery chillers have been designed for high-performing and intensive production. In order to offer a customized solution to any request, the tank capacities vary from 80 to 150 liters and their size has to be chosen according to the amount of water needed for the single maximum delivery for one mixer (or more mixers simultaneously, depending on the production system).

Thanks to the plate heat exchanger, the water in the tank is cooled very quickly in the interval between one delivery and the following. The entire series is equipped with an electronic controller which supervises all the functions.

-Low energy cost, efficiency
-Hygiene standard, all parts stainless steel
-Smart design
-User friendly, easy to use
-Durability
-High performance

TECHNICAL INFORMATION

Model Name: CWM-300

Cold Water Capacity (1hr): 80 lt

Water Outlet Temperature: 1,5 ℃

Tank Capacity: 300 lt

Compressor Power: 1,33 HP

Compressor Electric Power: 1 kw/h

Compressor Type: Hermetic

Maximum Working Temperature: +55 ℃

Refrigerants: R404a

Chassis: Stainless

Dimension (Diameter / Height): 800 / 1780 mm

Empty Weight: 140 Kg

Energy: 220V / 50-60hz / 1Ph

CWM-600

Nesim industrial bakery chillers have been designed for high-performing and intensive production. In order to offer a customized solution to any request, the tank capacities vary from 80 to 150 liters and their size has to be chosen according to the amount of water needed for the single maximum delivery for one mixer (or more mixers simultaneously, depending on the production system).

Thanks to the plate heat exchanger, the water in the tank is cooled very quickly in the interval between one delivery and the following. The entire series is equipped with an electronic controller which supervises all the functions.

-Low energy cost, efficiency
-Hygiene standard, all parts stainless steel
-Smart design
-User friendly, easy to use
-Durability
-High performance

TECHNICAL INFORMATION

Model Name: CWM-600

Cold Water Capacity (1hr): 100 lt

Water Outlet Temperature: 1,5 ℃

Tank Capacity: 600 lt

Compressor Power: 1,33 HP

Compressor Electric Power: 1 kw/h

Compressor Type: Hermetic

Maximum Working Temperature: +55 ℃

Refrigerants: R404a

Chassis: Stainless

Dimension (Diameter / Height): 960 / 2050 mm

Empty Weight: 200 Kg

Energy: 220V / 50-60hz / 1Ph

CWM-900

Nesim industrial bakery chillers have been designed for high-performing and intensive production. In order to offer a customized solution to any request, the tank capacities vary from 80 to 150 liters and their size has to be chosen according to the amount of water needed for the single maximum delivery for one mixer (or more mixers simultaneously, depending on the production system).

Thanks to the plate heat exchanger, the water in the tank is cooled very quickly in the interval between one delivery and the following. The entire series is equipped with an electronic controller which supervises all the functions.

-Low energy cost, efficiency
-Hygiene standard, all parts stainless steel
-Smart design
-User friendly, easy to use
-Durability
-High performance

TECHNICAL INFORMATION

Model Name: CWM-900

Cold Water Capacity (1hr): 150 lt

Water Outlet Temperature: 1,5 ℃

Tank Capacity: 900 lt

Compressor Power: 2 HP

Compressor Electric Power: 1,5 kw/h

Compressor Type: Hermetic

Maximum Working Temperature: +55 ℃

Refrigerants: R404a

Chassis: Stainless

Dimension (Diameter / Height): 1120 / 2070 mm

Empty Weight: 270 Kg

Energy: 380V / 50hz / 3Ph

FH-0100

All devices include cabled remote control panel. It is shipped ready to be installed, including electricity panel and all automatic control components.

In our cooling units which are not limited only to the device design, air circulation, evaporator and condenser surfaces are extremely important. In particular, the most commonly experienced problem is the inadequacy of the machines in warm weathers, becoming inoperable. This problem has been overcome in nesim units, and it has a different productivity quality, when compared to other companies’ products.

It is compatible with European Union norms and produced with CE label.

It is delivered after performing all the tests of internal and external units and nitrogen charge

TECHNICAL INFORMATION

Model Name: FH-0100

Cooling Capacity: 1133 watt

Maximum Cooling Volume: 7 m3

Compressor Power: 1 HP

Compressor Power Input: 0,81 Kw

Compressor Cylinder Displacement: 24,6 cm3/h

Compressor Type: Hermetic

Weight: 95 kg

Evaporation Temperature: -25 ℃

Condensation Temperature: +40 ℃

Energy: 220V/50Hz

FH-0120

All devices include cabled remote control panel. It is shipped ready to be installed, including electricity panel and all automatic control components.

In our cooling units which are not limited only to the device design, air circulation, evaporator and condenser surfaces are extremely important. In particular, the most commonly experienced problem is the inadequacy of the machines in warm weathers, becoming inoperable. This problem has been overcome in nesim units, and it has a different productivity quality, when compared to other companies’ products.

It is compatible with European Union norms and produced with CE label.

It is delivered after performing all the tests of internal and external units and nitrogen charge

TECHNICAL INFORMATION

Model Name: FH-0120

Cooling Capacity: 1439 watt

Maximum Cooling Volume: 10 m3

Compressor Power: 1,5 HP

Compressor Power Input: 1,1 Kw

Compressor Cylinder Displacement: 34,4 cm3/h

Compressor Type: Hermetic

Weight: 95 kg

Evaporation Temperature: -25 ℃

Condensation Temperature: +40 ℃

Energy: 220V/50Hz

FH-0170

All devices include cabled remote control panel. It is shipped ready to be installed, including electricity panel and all automatic control components.

In our cooling units which are not limited only to the device design, air circulation, evaporator and condenser surfaces are extremely important. In particular, the most commonly experienced problem is the inadequacy of the machines in warm weathers, becoming inoperable. This problem has been overcome in nesim units, and it has a different productivity quality, when compared to other companies’ products.

It is compatible with European Union norms and produced with CE label.

It is delivered after performing all the tests of internal and external units and nitrogen charge

TECHNICAL INFORMATION

Model Name: FH-0170

Cooling Capacity: 2111 watt

Maximum Cooling Volume: 21 m3

Compressor Power: 2 HP

Compressor Power Input: 1,6 Kw

Compressor Cylinder Displacement: 53,2 cm3/h

Compressor Type: Hermetic

Weight: 105 kg

Evaporation Temperature: -25 ℃

Condensation Temperature: +40 ℃

Energy: 380V/50Hz/3Ph

FH-0240

All devices include cabled remote control panel. It is shipped ready to be installed, including electricity panel and all automatic control components.

In our cooling units which are not limited only to the device design, air circulation, evaporator and condenser surfaces are extremely important. In particular, the most commonly experienced problem is the inadequacy of the machines in warm weathers, becoming inoperable. This problem has been overcome in nesim units, and it has a different productivity quality, when compared to other companies’ products.

It is compatible with European Union norms and produced with CE label.

It is delivered after performing all the tests of internal and external units and nitrogen charge

TECHNICAL INFORMATION

Model Name: FH-0240

Cooling Capacity: 2887 watt

Maximum Cooling Volume: 33 m3

Compressor Power: 3 HP

Compressor Power Input: 2 Kw

Compressor Cylinder Displacement: 74,25 cm3/h

Compressor Type: Hermetic

Weight: 125 kg

Evaporation Temperature: -25 ℃

Condensation Temperature: +40 ℃

Energy: 380V/50Hz/3Ph